MARCH 08,2024

Bismuth oxide nanoparticles/waterborne polyurethane-coated fabrics for ionizing radiation protection

2024-03-08 14:13


Researchers have found that the development and application of a coating material of nano-bismuth oxide and water-based polyurethane on lightweight woven fabrics provides promising results for protection against ionizing radiation.

The research results proved that the fabrics coated with nano-bismuth oxide and water-based polyurethane not only performed well in the area of X-ray protection, but also showed positive properties in terms of the textile properties tested.  Source: Adobe.Stock

Ionizing radiation is the energy in the form of waves or particles that has the power to eject electrons from atoms and its main sources are radiological and nuclear medical examinations, cancer treatments, X-rays and gamma rays used in industry, and nuclear accidents. Since ionizing radiation has negative effects on human health, it is important to be protected against it by using shielding materials.

In a current study, a coating material comprising nano bismuth oxide and waterborne polyurethane (40% w/w WPU and 60% w/w Bi2O3) was developed and applied on to a commercially available, lightweight woven fabrics for fabricating wearable as well as flexible shielding materials. The X-ray shielding performance of the samples was measured as described in standard TS EN 61331-1:2014 at tube voltages of 40 kV, 60 kV, 80 kV, and 100 kV. In addition to the characterization analyses (i.e. SEM–EDS and FTIR), the coated fabrics were also subjected to some textile based performance tests, namely, water contact angle, abrasion, and stiffness in accordance with the relevant standards. The results of nano bismuth oxide and waterborne polyurethane-coated fabrics demonstrated promising results not only for X-ray shielding performance but also for the tested textile properties.

The study has been published in Journal of Coatings Technology and Research, Volume 21, Issue 1, 03 January 2024.


Disclaimer:The Institute of Plastic Research makes every effort to ensure the accuracy of the information, reliability of the data, and objectivity and fairness of the content and viewpoints described herein. However, we do not guarantee the accuracy and completeness of the information. Any losses or legal consequences resulting from actions taken based on this information are the sole responsibility of the individual undertaking them.

Media Contact

Luke
Head of Info Center

Release product requirements

Product Description:
Quantity:
Mailbox:
Contact Name:
Address:
Company Name:
Telephone No.:
Message:

0/2000