
Recommended products:Adhesion Resin PP5325 Suitable for Three-Coat One-Bake Systems, Providing Excellent Adhesion to PP Plastics
2025-06-12 08:39
PP Adhesion Resin¡ªPP5325 is an acrylic resin modified by copolymerization of special monomers with chlorinated polyolefins, offering excellent adhesion to PP plastics.
Product Features
l Composition: Chlorinated polyolefin-modified acrylic resin
l Appearance: Yellow liquid
l Non-volatile Content: 46¡À2%
l Solvent: (TOL/XYL)
l Specific Gravity: Approx. 0.95
l Viscosity (25℃): 1000-2500 mPa¡¤s
l Acid Value: 6-12 mg KOH/g (100%)
l Glass Transition Temperature: 65℃
Key Properties
l Primarily used in coating systems for PP plastics.
l Acts as an adhesion primer, providing excellent adhesion after topcoat application.
l Offers outstanding interlayer adhesion, grindability, and boiling water resistance.
l Excellent pigment-wetting properties and workability.
l Especially suitable for three-coat one-bake systems (with polyester as the topcoat).
Application Fields
l Primer for PP or PP/EPDM+TD20/30 automotive bumpers
l Coatings for polypropylene (PP) plastic toys, household appliances, and crafts
l Single-component primers for flower pots and strollers
Usage Instructions
l Mix with pigments and grind directly to prepare basecoat.
l Can be used directly or combined with other resins to create basecoats or metallic paints. Conduct tests to determine the optimal dosage before use.
Recommended Dosage
Depends on the coating system; conduct tests to determine the optimal dosage.
Formulation of Treatment Agent
Raw Material |
Dosage (Parts) |
Treatment agent formulation |
PP5325 |
50-60 |
|
MJ-24 |
0-10 |
|
PP White Paste |
40 |
|
TOL |
5 |
|
XYL |
13.5 |
|
EAC |
5 |
|
5010 Dispersant |
0.5 |
|
Anti-settling Agent |
1 |
|
Total |
100 |
Handling & Safety
¡¤ Viscosity Increase & Gelation: PP5325 may experience viscosity increase or gelation due to solvent evaporation or low temperatures. If gelation occurs, heat the product in a water bath at 50-60¡ãC, add a small amount of toluene, and stir to restore fluidity without affecting performance.
¡¤ Safety Precautions: Contains solvents. Handle with care to avoid skin and eye contact. Refer to the Material Safety Data Sheet for additional information.
Storage Conditions
¡¤ Keep away from heat and open flames.
¡¤ Store in a cool, well-ventilated area with tightly sealed containers.
¡¤ Storage temperature: 0¡ãC to 40¡ãC.
Packaging
Net Weight: 200kg/25kg
Shelf Life
12 months from the date of production.
More Hzinfo
- Anhui Hechen Launches 80,000-Ton Paint Tech Upgrade; Qigu Group Deploys Multi-Dimensional Strategy Amid Market Transformation
- The "Environmental Impact Report Form for the 80,000 Tons/Year Paint Optimization and Upgrade Project" of Anhui Hechen New Material Co., Ltd. was officially accepted for public announcement.
-
2025-07-10
- Flint Group expands Italian resin facility for NC-free inks
- Flint Group has expanded its resin production site in Caronno, Italy, to strengthen supply security for nitrocellulose-free inks used in flexible packaging. The investment responds to rising demand fo
-
2025-07-10
- Chemetall site in China receives recognition from Pinghu Dushan Port government for its commitment to drive sustainability
- Chemetall¡¯s largest production site worldwide powered by 100% renewable electricity
-
2025-07-10