
Rare earth carboxylate compounds on the barrier properties and active corrosion inhibition of epoxy coatings on mild steel
2024-08-15 08:46
Researchers found that the addition of lanthanum 4-hydroxycinnamic acid (La(4-OHcin)3) and yttrium 3-(4-methylbenzoyl)propionate (Y(mbp)3) to bisphenol-based epoxy resin coatings significantly improves corrosion resistance and delays electrolytic penetration.

In a current research, two rare earth carboxylate compounds, lanthanum 4-hydroxycinnamate (La(4-OHcin)3) and yttrium 3-(4-methylbenzoyl)propanoate (Y(mbp)3), were incorporated into bisphenol-based epoxy resin to investigate their effectiveness in coating barrier properties and active corrosion inhibition. EIS results showed that the incorporation of rare earth carboxylate inhibitors significantly improved corrosion resistance compared to the inhibitor free coating, with the global impedance modulus remaining at a level higher than 1 GΩ cm2 after 219 days immersion. Following EIS experiments, cross-sectional views of the coatings exhibited a pore-plugging behavior by rare earth containing precipitates, which reinforced the coating barrier properties and delayed the electrolyte diffusion process. These effects were also reflected from the electrochemical parameters extracted from breakpoint frequency analysis and equiIn a curten research, two rare earth carboxylate compounds, lanthanum 4-hydroxycinnamate (La(4-OHcin)3) and yttrium 3-(4-methylbenzoyl)propanoate (Y(mbp)3), were incorporated into bisphenol-based epoxy resin to investigate their effectiveness in coating barrier properties and active corrosion inhibition.
source:european-coatings
More Hzinfo
- New degradable silicone-hydrogel marine coating resists bio-fouling
- The novel coating achieved over 98?% inhibition of microbial growth in laboratory tests.
-
2025-07-03
- ROSS Offers Vacuum-Design High Shear Mixers
- ROSS line of High Shear Mixers caters to multiple industries, including coatings and specialty chemical manufacturing.
-
2025-07-03
- Recommended products: Adhesion Resin PP5325 Suitable for Three-Coat One-Bake Systems, Providing Excellent Adhesion to PP Plastics
- PP Adhesion Resin—PP5325 is an acrylic resin modified by copolymerization of special monomers with chlorinated polyolefins, offering excellent adhesion to PP plastics.
-
2025-07-02