Xiyuan LTW adhesion-promoting resin is a specially modified resin and an additive-type resin with broad compatibility. It is designed to enhance the interlayer adhesion of coatings on metals, inorganic materials, and certain plastics.

Product Features

Composition       Free from polysiloxane macromolecular compounds

Appearance             Slightly yellow, clear liquid 

Non-volatile Content    60±2%

Solvent               XYL

Specific Gravity       about1.08-1.10

Acid Value        25-45mg KOH/g

Application Systems & Fields

• Acrylic coating systems

• Polyester (alkyd) coating systems

• Industrial coatings

• Heavy-duty protective coatings

• Can printing and coil coatings

Key Properties

•Enhances aluminum and pearlescent pigment adhesion in coatings and inks, reducing pigment detachment.

•Improves interlayer adhesion in metallic coatings, significantly enhancing film adhesion.

•Boosts corrosion protection performance, increasing coating ductility and impact resistance.

•Maintains weather resistance and exhibits excellent compatibility with various formulations.

Usage Guidelines

1. Can be added at any stage of production.

2. For resin modification, suitability should be tested as needed.

3. Recommended dosage: 1-3% of the total formulation.

Handling & Safety

This product contains solvents and should be handled with care. Avoid contact with skin and eyes.

Refer to the Material Safety Data Sheet for detailed safety instructions.

Storage Conditions

•Keep away from heat and open flames.

•Store in a cool, well-ventilated place with tightly sealed containers.

•Storage temperature: 0°C to 40°C

•If stored below 5°C, the product may appear cloudy or separate. Heat in a water bath until clear, then mix well before use.

Packaging

Net weight: 200kg / 25kg

Shelf Life

12 months from the date of manufacture.